Color: 3 Bandits
Easy to assemble gets you to the flying field quick. 3 rockets, all mini engine powered, can reach heights of 550 feet. Better keep your eyes open for this these little guys or they will be out of sight before you know it. Recommended Engines: 1/2A3-4T (First Flight), A3-4T, A10-3T Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.
Estes model rocket engine bulk packs are available in four total impulse ranges: Â½A (mini engine), A, B or C (standard engines). These packs may be used for the rocket bulk packs or other Estes rockets. Whether you are launching rockets at school with students, at a youth group activity or rocket club monthly launch, Estes engine bulk packs are a must. Engine bulk packs come with all the rocket engine supplies you need to launch 24 rockets. Included are 24 rocket engines, 30 model rocket igniters, 24 reusable igniter plugs and 75 squares of recovery wadding. Use the B6-4 engine to launch these bulk pack rockets: Generic E2X, Alpha III, Wizard, Viking and Alpha.
4D Vision International Space Station with Space Shuttle, 60-Piece, 1/450 Scale
Manufacturer: Daron World wide Trading Inc.
Brand: 4D Master
Put together this detailed 3D International Space Station puzzle. No need to paint or glue. Just fit the pieces together like a puzzle. With its detailed finish, this model ISS and Space Shuttle makes for a great desktop piece for aspiring astronauts or just space enthusiasts. Great gift for budding astronauts and kids with an interest in space exploration. Get this ISS puzzle for kids as a gift to engage their brain while also being a fun toy that they will love! 60 puzzle pieces with stand. For budding astronauts ages 8 and up. Model Measures approximately 26 cm long.
Estes model rocket engine bulk packs are available in four total impulse ranges: Â½A (mini engine), A, B or C (standard engines). These packs may be used for the rocket bulk packs or other Estes rockets. Whether you are launching rockets at school with students, at a youth group activity or rocket club monthly launch, Estes engine bulk packs are a must. Engine bulk packs come with all the rocket engine supplies you need to launch 24 rockets. Included are 24 rocket engines, 30 model rocket igniters, 24 reusable igniter plugs and 75 squares of recovery wadding. Use the C6-5 engine to launch these bulk pack rockets: Alpha III, Generic E2X, Alpha, Viking and Wizard.
The Big Daddy is a real head-turner at the launch field! From the Skill Level 2 Series, not only is it a classic but it has been redesigned to handle our super powerful E engines and can reach a cloud topping 900 feet. If you prefer to keep it suborbital, it will also fly extremely well on Estes C11 or D engines. Rocketeers aged 18 and up can enjoy this high-powered kit, with adult supervision for those under 18. The biggest little rocket around, at just under 20 inches tall with a 3 inch waist, this high powered rocket is built to handle E engine power! The Big Daddy can reach a cloud topping 900 feet. 3, 2, 1, Lift Off! BIG is better! Well in most things - big is better. Standing just under 20 inches tall and having a Big Daddy waist size of 3 inches, this high powered bullet is built to handle all the power you can stuff into the motor tube. The Estes rocket engineers have given the Big Daddy a contemporary new look and the biggest blow molded nose cones in the hobby. Whether launching on Estes E, C11 or D engines, this extreme rocket is returned safely on a colorful 24 inch preassembled parachute. Adding to your growing fleet of Rockets? Check out the brand new Mega Mosquito Level 2 Model Rocket Kit. Blast Off to Learning Fun In addition to the excitement and entertainment it provides, rocketry also has significant educational value. Model rockets transform kids into amateur rocket scientists, encouraging them to think about how the rockets work. Rocket building teaches kids the basics of propulsion, flight, and aerodynamics, and can help foster an early interest in science and engineering. Skill Level 2 is the first tier of more advanced kits that require beginner skills in model rocket construction, finishing and painting. Quality Estes body tubes, laser cut wood fins, molded plastic nose cone and waterslide decals make experience necessary to build this Skill Level 2 kit but the end result is worth the effort. Mission Control The Big Daddy requires a Porta-Pad E and E Launch Controller as wel...
StratoLauncher + StratoFins Water Rocket Launcher Kit
The StratoLauncher kit includes a preassembled water rocket launcher, an adjustment tool, StratoFinsÂ®, 2 tent pegs, and easy operating instructions. Tilt launch tube to a 90 degree angle and rotate to the center of the launchpad, thread the string through the eye screw and it is ready to use. Launcher will enable you to propel a 2 liter plastic (PET*) soda pop bottle over 350 ft. into the sky using only water and compressed air from a bicycle pump, a foot pump for a car, or an air compressor. Fuel (water and air) is essentially free and readily available allowing countless launches without additional expense. StratoLauncher supports most .5L, 1L, 1.25L and 2 liter plastic (PET*) bottles at air pressures as low as 20 PSI on up to 120 PSI. You will be amazed how high only 40 PSI will propel a bottle with StratoFinsÂ® attached to it. After pumping up the bottle to the PSI of your choice, you control when liftoff occurs by pulling on the brightly colored string to release the trigger from a safe distance and out of the splash zone. Great item for people of all ages for fun, science projects, school classes, parties and may well draw a crowd where it is used. Made in the USA from durable non-corrosive Schedule 40 PVC pipe and HDPE plastic. NO additional materials are required such as duct tape, wooden board for base, metal mounting brackets, or expensive pulley for string to operate the trigger. This is a complete launcher, NO gluing, taping, cutting, or measuring required. You will need to supply: Plastic (PET*) soda pop bottle, water, and air source (bicycle pump, foot pump, or air compressor). No tools required for assembly or adjustment. * Polyethylene terephthalate (aka PET) is a thermoplastic polymer resin of the polyester family that is used in soda pop bottles. Serious bodily injury could result from using any other type of bottle.
The Estes Alpha III rocket launch set contains a launch controller, launch pad, and rocket kit packet with materials and instructions required to assemble the rocket. It is recommended for children 10 years and older with adult supervision up to age 12. The orange plastic nose cone, body tube, one-piece plastic tail fin unit, and self-stick decals allow assembly of the rocket without painting. Additional supplies required to launch the rocket include model rocket engine, starter, recovery wadding, and glue (sold separately). This rocket launch set provides the equipment required to launch (with required components) the Alpha III rocket repeatedly and is suitable for youth group activities such as with clubs and schools.SpecificationsSkill levelEasy to Assemble (E2X), simple gluing, no paintingAge recommendation10 years and up, adult supervision under 12Recommended engines1/2A6-2, A8-3 (First Flight), A8-5, B4-4, B6-4, B6-6, C6-5, C6-7Projected maximum altitude1,100' (335m)Rocket weight1.2 oz. (34 g)Dimensions*12.3 x 0.98" (H x W)Required components (not included)Rocket Engine with Starter, such as Estes 001598 A8-3 EngineRecovery Wadding, such as Estes 002274 Wadding*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right.A model rocket kit includes reusable parts, and requires launching equipment and single-use launching supplies. These kits are recommended for children 10 years and older, with adult supervision advised to age 12. Rocket kit assembly encompasses a range of skill levelsâ€”from Easy-to-Assemble (E2X), requiring only simple gluing and less than an hour of timeâ€”to Level 5, requiring multi-step assembly with measuring, cutting, gluing, and painting tasks. Reusable rocket kit components include a cone, a body tube, and a recovery parachute. A rocket engine, a starter, and recovery wadding are used once. Rocket engines come in a variety of sizes, time delays, and burn durations. A "first-flight" engine recommendation is gen...